LTC3862EUH#TRPBF
| Parameters | |
|---|---|
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
LTC3862EUH#TRPBF Overview
It comes in the 24-WQFN Exposed Pad package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 4V~36V and has a 4V~36V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 75kHz~500kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Soft Start which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at QUAD. An array of 24 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "LTC3862". 24 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4V. Statistically, the DC regulator outputs 200V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. The max frequency of the pmic can reach 500kHz. Channels 1 are required for high-quality communication.
LTC3862EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EUH#TRPBF DC to DC converter applications.
- Large fire protection systems
- Hydro power
- Product burn-in
- Digital precision reference circuits
- Game consoles
- Smart grid
- Automatic testing equipment
- Telecommunications equipment
- Milling machines
- Scientific testing
