LTC3862HFE-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3862HFE-2#PBF Overview
In the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 5.5V~36V volts and has 5.5V~36V supply voltage. A -40°C~150°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 75kHz~500kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control, Phase Control, Soft Start provides dcdc regulator efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 24 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. In addition to "LTC3862", there are other relevant dc to dc converter ics you can find. 24 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 5.5V. DC regulator outputs 3.8V voltage based on test statistics. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. 500kHz is the maximum frequency of this dc regulators. The value of DC to DC voltage regulator is set to ALSO OPERATES AT 10V in order to better satisfy the requirement.
LTC3862HFE-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862HFE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HFE-2#PBF DC to DC converter applications.
- Access control systems
- Various CNC machine tools
- Industrial robots
- Thermal power
- Medical monitoring systems
- Electric water heaters
- Handheld GPS
- Scientific research
- Energy management systems
- Correction machines
