LTC3862HFE-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3862HFE-2#TRPBF Overview
In the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. A 5.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~150°C TJ. It can switch at 75kHz~500kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Soft Start which allows efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 24 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 12V is input. LTC3862 can be searched for other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 5.5V. Statistically, the DC regulator outputs 3.8V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. This value is ALSO OPERATES AT 10V so that DC to DC voltage regulator better serves the purpose.
LTC3862HFE-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862HFE-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HFE-2#TRPBF DC to DC converter applications.
- Product burn-in
- Experimental setup
- Automatic testing equipment
- Radio equipment
- Electrical power transmission
- Serial communication converter
- CNC system
- Domestic water pumps
- Industrial controllers
- Computed tomography (CT)
