LTC3862HGN-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862HGN-2#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 24-SSOP (0.154, 3.90mm Width) package. 2 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 5.5V~36V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~150°C TJ dc switcher. The switching controller is capable of switching at the 75kHz~500kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Phase Control, Soft Start is used for efficient switching control in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. The 24 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. LTC3862 can be searched for other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. 5.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 3.8V. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. This value is ALSO OPERATES AT 10V so that DC to DC voltage regulator better serves the purpose.
LTC3862HGN-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862HGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HGN-2#TRPBF DC to DC converter applications.
- Balance equipment
- Special machining machine tools
- Handheld GPS
- Wind power
- Direct power supply system
- Thermal power
- Laboratories
- Sensitive electronic devices
- Nuclear power plants
- Domestic water pumps
