LTC3862HGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862HGN#TRPBF Overview
With its 24-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4V~36V. Workable in an dc switcher where -40°C~150°C TJ is the -40°C~150°C TJrm. In this switching controller, the switch can be set to 75kHz~500kHz. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Phase Control, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. A variety of 24 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "LTC3862". There are 24 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. DC regulator outputs 3.8V voltage based on test statistics. This dc to dc regulator accepts only 36V input voltage at most. 500kHz is the maximum frequency of this dc regulators. Channels are 1 for high-quality communication.
LTC3862HGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862HGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HGN#TRPBF DC to DC converter applications.
- Sensitive electronic devices
- PSRR circuits
- Automatic plug-in machines
- Printing equipment
- Shearing machines
- Pipe bending machines
- Medical monitoring systems
- Surface processing equipment
- Electrical power transmission
- Solar power plants
