LTC3862HUH-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3862HUH-2#PBF Overview
With its 24-WQFN Exposed Pad package, the switching controller fits the needs of most applications. 2 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 5.5V~36V voltage are supplied and operated. Qualified to work in a -40°C~150°C TJ dc switcher. In this switching controller, the switch can be set to 75kHz~500kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". In total, switching converter has 24 pins. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 5.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 3.8V voltage based on test statistics. Voltages 36V are the maximum that the dc to dc regulator will accept. 500kHz is the maximum frequency of this dc regulators. This value is ALSO OPERATES AT 10V so that DC to DC voltage regulator better serves the purpose.
LTC3862HUH-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862HUH-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HUH-2#PBF DC to DC converter applications.
- Handheld GPS
- Precision electronic equipment
- Ball screw pair
- Wide-range voltage regulation circuits
- Scientific research
- Smoke prevention equipment
- Printing equipment
- Alternators
- Computer-related products
- Plate bending machines
