LTC3862HUH-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3862HUH-2#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 24-WQFN Exposed Pad package. dc motor controller is suitable for 2 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 5.5V~36V and has a 5.5V~36V supply voltage. Qualified to work in a -40°C~150°C TJ dc switcher. The switching controller is capable of switching at the 75kHz~500kHz position. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Soft Start which allows efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. The 24 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 5.5V. According to the test statistics, DC regulator outputs 3.8V voltage. At most, the dc to dc regulator accepts 36V input voltage. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES AT 10V.
LTC3862HUH-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862HUH-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HUH-2#TRPBF DC to DC converter applications.
- Wind power
- Combined machine tools
- Motor controller circuits
- Packaging
- Lathes
- Handheld GPS
- Planers
- Computer-related products
- Remotely powered electric motors
- Medical monitoring systems
