LTC3862HUH#TRPBF
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
LTC3862HUH#TRPBF Overview
With its 24-WQFN Exposed Pad package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. The pmic is packaged in Tape & Reel (TR) solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). DC control operates at 4V~36V volts and has 4V~36V supply voltage. Workable in an dc switcher where -40°C~150°C TJ is the -40°C~150°C TJrm. Using this switching controller, it is possible to switch at 75kHz~500kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Phase Control, Soft Start is included in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of terminations with 24 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. LTC3862 can be used to locate other relevant dc to dc converter ics. 24 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. Test statistics indicate DC regulator outputs 200V voltage. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. For high-quality communication, there are 1 channels.
LTC3862HUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862HUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HUH#TRPBF DC to DC converter applications.
- Serial communication converter
- ATMs
- Correction machines
- Wind power
- Machining centers
- Radio equipment
- Industrial robots
- Digital precision reference circuits
- Servo drive system
- Household control circuits
