LTC3862IFE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Max Duty Cycle | 96 % |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3862IFE-1#PBF Overview
The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 8.5V~36V. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 75kHz~500kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control, Phase Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 24. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "LTC3862". There are 24 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended to use 8.5V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 200V. This dc to dc regulator accepts only 36V input voltage at most. It is set to 96 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC regulators have a maximum frequency of 500kHz. There are 1 channels for high-quality communication.
LTC3862IFE-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
LTC3862IFE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IFE-1#PBF DC to DC converter applications.
- Access control systems
- CNC system
- Electric water heaters
- Printing
- Laboratories
- Automatic testing equipment
- Direct power supply system
- Milling machines
- Sink circuits
- Shearing machines
