LTC3862IFE-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IFE-1#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. This dc motor controller can be used to generate outputs with 2 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 8.5V~36V volts and has 8.5V~36V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. With this switching controller, you can switch at 75kHz~500kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 24 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". There are only 24 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. 8.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 200V volts. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. DC regulator's maximum frequency is 500kHz. There are 1 channels for high-quality communication.
LTC3862IFE-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862IFE-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IFE-1#TRPBF DC to DC converter applications.
- Industrial controllers
- Electric water heaters
- Sensitive electronic devices
- Computed tomography (CT)
- Digital video recorders
- Hydro power
- Scientific testing
- Packaging
- Printing
- Fire elevators
