LTC3862IFE-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3862IFE-2#PBF Overview
With its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller fits the needs of most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 5.5V~36V. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 75kHz~500kHz position. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 24 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". There are a total of 24 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 5.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 3.8V volts. The dc to dc regulator can only accept 36V input voltage. 500kHz is the maximum frequency of this dc regulators. This value is ALSO OPERATES AT 10V so that DC to DC voltage regulator better serves the purpose.
LTC3862IFE-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862IFE-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IFE-2#PBF DC to DC converter applications.
- Die casting equipment
- Electrical distribution systems
- SMT equipment
- Industrial robots
- Low output voltage switching power supply circuits
- Experimental setup
- Bending machines
- Network technology
- Industrial controllers
- Mobile phones
