LTC3862IFE-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IFE-2#TRPBF Overview
The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. The dc motor controller is adquate to generate for 2 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 5.5V~36V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~125°C TJ. The switching controller is capable of switching at the 75kHz~500kHz position. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 24 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. LTC3862 can be used to locate other relevant dc to dc converter ics. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 5.5V. DC regulator outputs 3.8V voltage based on test statistics. Voltages 36V are the maximum that the dc to dc regulator will accept. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AT 10V.
LTC3862IFE-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862IFE-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IFE-2#TRPBF DC to DC converter applications.
- Ball screw pair
- Program control systems
- USB circuits
- Current source circuits
- Hydrogen power
- Terrestrial set-top boxes
- Electrical distribution systems
- Printing
- Textile machinery
- Mobile phones
