LTC3862IFE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IFE#TRPBF Overview
It comes in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~36V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. Using this switching controller, it is possible to switch at 75kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Frequency Control, Phase Control, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 24. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. In addition to "LTC3862", there are other relevant dc to dc converter ics you can find. In total, switching converter has 24 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 4V is the minimum required for the dc dc voltage regulator. DC regulator outputs 200V voltage based on test statistics. Voltages 36V are the maximum that the dc to dc regulator will accept. There is a maximum frequency of 500kHz on this dc regulators. The number of channels available for high-quality communication is 1.
LTC3862IFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862IFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IFE#TRPBF DC to DC converter applications.
- Smoke prevention equipment
- Linear guide
- Driver circuits
- Flaw detection equipment
- CNC system
- Digital video recorders
- Access control systems
- Network technology
- Imported equipment
- Window air conditioners
