LTC3862IGN-1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | Non-RoHS Compliant |
LTC3862IGN-1 Overview
It comes in the 24-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 8.5V~36V. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at 75kHz~500kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 12V is input. LTC3862 can be searched for other relevant dc to dc converter ics. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended to use 8.5V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 3.8V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. Hence, 10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE is used to better suit the DC to DC voltage regulator's situation.
LTC3862IGN-1 Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
10 VOLT LDO REGULATOR OUTPUT ALSO AVAILABLE
LTC3862IGN-1 Applications
There are a lot of Linear Technology/Analog Devices LTC3862IGN-1 DC to DC converter applications.
- Scientific testing
- Geothermal power
- Surface processing equipment
- Computer monitoring equipment of building
- Arc suppression circuits
- Current source circuits
- Imported equipment
- USB circuits
- Product burn-in
- Automation technology
