LTC3862IGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IGN-1#TRPBF Overview
With a 24-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 8.5V~36V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 75kHz~500kHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. An array of 24 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC3862". Switching converter has a total of 24 pins. 8.5V should be the minimum input voltage for the dc dc voltage regulator. A 3.8V voltage of DC regulator was detected in the test statistics. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. There is a maximum frequency of 500kHz on this dc regulators. There are 1 channels for high-quality communication.
LTC3862IGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862IGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IGN-1#TRPBF DC to DC converter applications.
- Smoke prevention equipment
- USB circuits
- Post equipment
- Various precision measuring instruments
- Constant current circuits
- Television equipment
- Household control circuits
- Analog precision reference circuits
- Terrestrial set-top boxes
- Computer rooms
