LTC3862IGN-2#TRPBF
| Parameters | |
|---|---|
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
LTC3862IGN-2#TRPBF Overview
As a result of 24-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 2. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 5.5V~36V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 75kHz~500kHz. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Phase Control, Soft Start is included in the dcdc regulator. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 24. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. LTC3862 can be searched for other relevant dc to dc converter ics. In particular, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 5.5V. Statistically, DC regulator outputs 3.8V volts. Voltages 36V are the maximum that the dc to dc regulator will accept. The value of DC to DC voltage regulator is set to ALSO OPERATES AT 10V in order to better satisfy the requirement.
LTC3862IGN-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862IGN-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IGN-2#TRPBF DC to DC converter applications.
- Magnetohydrodynamic power
- Serial communication converter
- Game consoles
- Machining centers
- Experimental setup
- Geothermal power
- Sensitive electronic devices
- Smoke prevention equipment
- Smart grid
- Imported equipment
