LTC3862IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.635mm |
| Frequency | 500kHz |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Max Output Current | 50mA |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Max Output Voltage | 5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 8.649mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LTC3862IGN#PBF Overview
As a result of 24-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4V~36V. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at 75kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. A search for "LTC3862" will reveal other relevant dc to dc converter ics. In total, switching converter has 24 pins. In particular, switching converter is a type of Switching Regulator or Controllers. A 200V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 50mA, which you should keep in mind when starting a project. Switching controller operates at 500kHz Hz. The maximum input voltage of dc switcher is 36V, so users should limit their voltage accordingly. A dc switcher can only produce an output current of 50mA. The switching converter can output 5V volts at its utmost, according to the datasheet. It is recommended that there be 1 channels for high-quality communication.
LTC3862IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LTC3862IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IGN#PBF DC to DC converter applications.
- Grinders
- Computed tomography (CT)
- CNC system
- Medical equipment
- Serial communication converter
- Packaging
- Emergency lighting monitoring equipment
- Various precision measuring detectors
- Shearing machines
- Energy management systems
