LTC3862IUH-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 8.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IUH-1#TRPBF Overview
Capsuled in the 24-WQFN Exposed Pad package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 8.5V~36V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 75kHz~500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of 24 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "LTC3862" to find other relevant dc to dc converter ics. In total, switching converter has 24 pins. There is a particular type of Switching Regulator or Controllers in switching converter. 8.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 200V volts. The dc to dc regulator can only accept a maximum input voltage of 36V. The max frequency of the pmic can reach 500kHz. In order to ensure high-quality communication, there are 1 channels available.
LTC3862IUH-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
LTC3862IUH-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IUH-1#TRPBF DC to DC converter applications.
- Current source circuits
- Industrial controllers
- Various precision measuring instruments
- Milling machines
- Household control circuits
- Sensitive electronic devices
- Post equipment
- ATMs
- Surface processing equipment
- Printing equipment
