LTC3862IUH-2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | BUCK |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
LTC3862IUH-2 Overview
With a 24-WQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. 5.5V~36V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 75kHz~500kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at QUAD . 24 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "LTC3862". There is a particular type of Switching Regulator or Controllers in switching converter. 5.5V should be the minimum input voltage for the dc dc voltage regulator. A 3.8V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 36V input voltage at most. DC to DC voltage regulator has a value of ALSO OPERATES AT 10V to better satisfy the need.
LTC3862IUH-2 Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862IUH-2 Applications
There are a lot of Linear Technology/Analog Devices LTC3862IUH-2 DC to DC converter applications.
- Motor controller circuits
- Ball screw pair
- Direct power supply system
- Emergency lighting monitoring equipment
- Planers
- Solar power plants
- Arc suppression circuits
- Product burn-in
- Computer-related products
- Special machining machine tools
