LTC3862IUH-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 10V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3862IUH-2#TRPBF Overview
Capsuled in the 24-WQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 5.5V~36V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. The switching controller is capable of switching at the 75kHz~500kHz position. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. The 24 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "LTC3862" to find other relevant dc to dc converter ics. Specially, switching converter corresponds to type Switching Regulator or Controllers. 5.5V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 3.8V. It should be fully noted that the dc to dc regulator only accepts 36V input voltage at most. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES AT 10V.
LTC3862IUH-2#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AT 10V
LTC3862IUH-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IUH-2#TRPBF DC to DC converter applications.
- Hydrogen power
- Cutting machine tools
- Shearing machines
- Access control systems
- Computer application technology
- Grinders
- Scientific testing
- Planers
- Terrestrial set-top boxes
- Product testing
