LTC3862IUH#PBF
| Parameters | |
|---|---|
| Max Output Voltage | 5V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Max Input Voltage | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 250 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Max Output Current | 50mA |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
LTC3862IUH#PBF Overview
With its 24-WQFN Exposed Pad package, the switching controller fits the needs of most applications. 2 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4V~36V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 75kHz~500kHz. A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control, Phase Control, Soft Start provides dcdc regulator efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. QUAD are the position of the terminal of the switching converters. 24 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. A search for "LTC3862" will reveal other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 200V voltage. normally, the dc dc regulator's output current is 50mA, which you should keep in mind when starting a project. Switching controllers operate at 500kHz frequencies. In order to limit the voltage of a dc switcher whose maximum input voltage is 36V, it must be limited by the user. There will be 50mA current output from the dc switcher above 50mA. The switching converter can output 5V volts at its utmost, according to the datasheet. Channels 1 are required for high-quality communication.
LTC3862IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LTC3862IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862IUH#PBF DC to DC converter applications.
- Hydraulic presses
- Constant current circuits
- Electric heating, lighting
- Computed tomography (CT)
- Radio equipment
- Sensitive electronic devices
- Shearing machines
- Hydro power
- Mobile phones
- Driver circuits
