LTC3864EDE#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3864 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~850kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
LTC3864EDE#PBF Overview
It comes in a 12-WFDFN Exposed Pad package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tube enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 3.5V~60V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 50kHz~850kHz. dc dc regulator is made easier with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 12 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. A search for "LTC3864" will reveal other relevant dc to dc converter ics. There are only 12 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3.5V. As determined by the test statistics, the output voltage of DC regulator is 60V. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES AS LDO REGULATOR.
LTC3864EDE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO OPERATES AS LDO REGULATOR
LTC3864EDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3864EDE#PBF DC to DC converter applications.
- CMM
- Direct power supply system
- Communication system
- Machining centers
- Radio equipment
- Scientific research
- Computer-related products
- Linear guide
- Computer monitoring equipment of building
- Flaw detection equipment
