LTC3864IMSE#TRPBF
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~850kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 100% |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-TSSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3864 |
| Function | Step-Down |
LTC3864IMSE#TRPBF Overview
The switching controller fits in the 12-TSSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 3.5V~60V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. There is a switch at 50kHz~850kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . A variety of 12 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LTC3864". Total pins of switching converter are 12. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 3.5V. Test statistics indicate DC regulator outputs 60V voltage. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. There is a maximum frequency of 810kHz for this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR so that the need can be met more directly.
LTC3864IMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AS LDO REGULATOR
LTC3864IMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3864IMSE#TRPBF DC to DC converter applications.
- Refrigerators of central air conditioners
- Emergency lighting monitoring equipment
- Program control systems
- Energy management systems
- Gear/thread machining machines
- Boring machines
- Electric heating, lighting
- Motor controller circuits
- Current source circuits
- Thermal power
