LTC3864MPDE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3864 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~850kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 810kHz |
| Duty Cycle (Max) | 100% |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3864MPDE#PBF Overview
With a 12-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Tube is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 3.5V~60V. Qualified to work in an dc switcher with -55°C~150°C TJ. With this switching controller, you can switch at 50kHz~850kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 12 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. A search for "LTC3864" will reveal other relevant dc to dc converter ics. There are 12 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator must be 3.5V. According to the test statistics, DC regulator outputs 60V voltage. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. The max frequency of the pmic can reach 810kHz. Hence, ALSO OPERATES AS LDO REGULATOR is used to better suit the DC to DC voltage regulator's situation.
LTC3864MPDE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES AS LDO REGULATOR
LTC3864MPDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3864MPDE#PBF DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Die casting equipment
- Driver circuits
- Direct power supply system
- Power supplies of electronic gadgets
- Textile machinery
- Electric water heaters
- Wind power
- Experimental setup
- Sensitive electronic devices
