LTC3864MPMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-TSSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AS LDO REGULATOR |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3864 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~60V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~850kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 810kHz |
| Max Duty Cycle | 100 % |
| Length | 4.039mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3864MPMSE#PBF Overview
Capsuled in the 12-TSSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 3.5V~60V volts and has 3.5V~60V supply voltage. Workable in an dc switcher where -55°C~150°C TJ is the -55°C~150°C TJrm. The switching controller can be switched at 50kHz~850kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 12 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "LTC3864". In total, switching converter has 12 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 3.5V. Based on the test statistics, DC regulator outputs voltage 60V. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. It is estimated that this dc regulatorhas a maximum frequency of 810kHz. DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR to better satisfy the need.
LTC3864MPMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~850kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO OPERATES AS LDO REGULATOR
LTC3864MPMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3864MPMSE#PBF DC to DC converter applications.
- seismic instrument power circuits
- Photovoltaic power
- Computer application technology
- Thermal power
- Digital video recorders
- Automation technology
- Flaw detection equipment
- Computer monitoring equipment of building
- Emergency lighting monitoring equipment
- Smoke exhaust equipment
