LTC3865EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3865 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 880kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LTC3865EFE#PBF Overview
It comes in a 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). 4.5V~38V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 250kHz~770kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of 38 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 15V. LTC3865 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 38 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 5V volts. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. 880kHz is the maximum frequency of this dc regulators. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V to better satisfy the need.
LTC3865EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V
LTC3865EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3865EFE#PBF DC to DC converter applications.
- Emergency lighting monitoring equipment
- Computed tomography (CT)
- Lathes
- Linear guide
- Magnetohydrodynamic power
- Digital display device
- Terrestrial set-top boxes
- Cutting machine tools
- Electric water heaters
- Access control systems
