LTC3865EUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3865 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 880kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3865EUH#PBF Overview
With a 32-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 4.5V~38V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Switching can be done at 250kHz~770kHz with this switching controller. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the QUAD position. A variety of 32 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. LTC3865 can be searched for other relevant dc to dc converter ics. There are 32 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The test statistics indicate that DC regulator outputs a voltage of 5V. At most, the dc to dc regulator accepts 38V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulators have a maximum frequency of 880kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V so that DC to DC voltage regulator better serves the purpose.
LTC3865EUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V
LTC3865EUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3865EUH#PBF DC to DC converter applications.
- Low output voltage switching power supply circuits
- Overvoltage protection circuits in TV sets
- USB circuits
- CNC system
- SMT equipment
- Automation technology
- Scientific testing
- Combined machine tools
- Experimental setup
- Injection molding machinery
