LTC3865EUH#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3865 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 880kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LTC3865EUH#TRPBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. A 4.5V~38V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 250kHz~770kHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of 32 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. A search for "LTC3865" will reveal other relevant dc to dc converter ics. In total, switching converter has 32 pins. In particular, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5V voltage. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. DC regulator has a maximum frequency of 880kHz. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V.
LTC3865EUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V
LTC3865EUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3865EUH#TRPBF DC to DC converter applications.
- Printing equipment
- CMM
- Ball screw pair
- Shearing machines
- Linear guide
- Flaw detection equipment
- Various precision measuring detectors
- Digital precision reference circuits
- Drilling machines
- Servo drive system
