Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
24 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Terminal Pitch |
0.65mm |
Base Part Number |
LTC3866 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
3.5V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
30A |
Voltage - Supply (Vcc/Vdd) |
4.5V~38V |
Control Features |
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
Input Voltage (Min) |
4.5V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
250kHz~770kHz |
Input Voltage (Max) |
38V |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
25ns |
Synchronous Rectifier |
Yes |
Fall Time (Typ) |
25 ns |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
850kHz |
Clock Sync |
No |
Duty Cycle |
95 % |
Length |
7.8mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
LTC3866EFE#TRPBF Overview
With a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~38V and has a 4.5V~38V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A switching controller such as this can switch at a value of 250kHz~770kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . An array of 24 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. Search for "LTC3866" to find other relevant dc to dc converter ics. There are a total of 24 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 3.5V voltage according to the test statistics. The dc to dc regulator is limited to 38V input voltage. You should note that the dc dc regulator's usual output current is 30A. There is a maximum frequency of 850kHz for this dc regulators. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V in order to better satisfy the requirement.
LTC3866EFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V
LTC3866EFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3866EFE#TRPBF DC to DC converter applications.
- Medical monitoring systems
- Packaging
- Experimental setup
- Digital precision reference circuits
- Fire elevators
- Grinders
- Various precision measuring instruments
- Elevator lighting
- Injection molding machinery
- Computed tomography (CT)