LTC3866EUF#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3866 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 850kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
LTC3866EUF#TRPBF Overview
It comes in a 24-WFQFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~38V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 250kHz~770kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at QUAD . The 24 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "LTC3866", there are other relevant dc to dc converter ics you can find. 24 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 3.5V. The dc to dc regulator can only accept 38V input voltage. You should note down the dc dc regulator's usual output current of 30A when you start a project. This dc regulatorhas a max frequency of 850kHz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V.
LTC3866EUF#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V
LTC3866EUF#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3866EUF#TRPBF DC to DC converter applications.
- Automatic plug-in machines
- Sink circuits
- Scientific testing
- Thermal power
- Hydrogen power
- CNC system
- Wind power
- Constant current circuits
- Grinders
- Nuclear power plants
