LTC3866IFE#PBF
| Parameters | |
|---|---|
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC3866 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LTC3866IFE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 1 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~38V. Worked in an dc switcher with a -40°C~125°C TJ rating. With this switching controller, you can switch at 250kHz~770kHz. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 24 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 15V. You can find other relevant dc to dc converter ics by searching "LTC3866". Switching converter type is specifically Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 5.5V. The dc to dc regulator can only accept a maximum input voltage of 38V. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V.
LTC3866IFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V
LTC3866IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3866IFE#PBF DC to DC converter applications.
- Bending machines
- USB circuits
- Various precision measuring detectors
- Automatic plug-in machines
- Balance equipment
- Automatic testing equipment
- Combined machine tools
- Magnetohydrodynamic power
- Hydraulic presses
- Flexible manufacturing cells
