LTC3867EUF#TRPBF
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3867 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1.2MHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.2MHz |
| Duty Cycle (Max) | 98% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
LTC3867EUF#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 24-WFQFN Exposed Pad package. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 4V~38V. Qualified to work in an dc switcher with -40°C~125°C TJ. There is a switch at 200kHz~1.2MHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . A variety of terminations with 24 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3867". 24 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 4V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.3V. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. 1.2MHz is the maximum frequency of this dc regulators.
LTC3867EUF#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3867EUF#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3867EUF#TRPBF DC to DC converter applications.
- Current source circuits
- Motor controller circuits
- ATMs
- Scientific testing
- Balance equipment
- Smoke exhaust equipment
- Thermal power
- Wide-range voltage regulation circuits
- Ball screw pair
- Mobile phones
