LTC3868IGN-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3868 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~24V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3868IGN-1#TRPBF Overview
It comes in a 28-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 4V~24V volts and has 4V~24V supply voltage. Suitable for a -40°C~85°C TA dc switcher. The switching controller can be switched at 105kHz~835kHz 350kHz~535kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. The 28 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "LTC3868". There are only 28 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Statistically, the DC regulator outputs 5.1V voltage. The max frequency of the pmic can reach 850kHz. In order to ensure high-quality communication, there are 1 channels available.
LTC3868IGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3868IGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3868IGN-1#TRPBF DC to DC converter applications.
- Serial communication converter
- Correction machines
- Production lines
- Injection molding machinery
- Drilling machines
- Automation technology
- Post equipment
- Combined machine tools
- Medical equipment
- Automatic plug-in machines
