LTC3869IGN-2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3869 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.1A |
| Frequency - Switching | 250kHz~780kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 95% |
| Height Seated (Max) | 1.75mm |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | Non-RoHS Compliant |
LTC3869IGN-2 Overview
Capsuled in the 28-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 2 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4V~38V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. This switching controller can switch at 250kHz~780kHz. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. A variety of terminations with 28 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3869". An input voltage of 4V is the minimum required for the dc dc voltage regulator. It should be fully noted that the dc to dc regulator only accepts 38V input voltage at most. The output value is set to the greatest value of 0.1A.
LTC3869IGN-2 Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3869IGN-2 Applications
There are a lot of Linear Technology/Analog Devices LTC3869IGN-2 DC to DC converter applications.
- Special machining machine tools
- Large fire protection systems
- Production lines
- Grinders
- Plate bending machines
- Magnetohydrodynamic power
- Medical equipment
- Product burn-in
- Mobile phones
- Electrical distribution systems
