LTC3869IGN-2#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3869 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 12.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~780kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 95% |
| Length | 9.893mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3869IGN-2#PBF Overview
It comes in the 28-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4V~38V. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 250kHz~780kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 28. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. LTC3869 can be used to locate other relevant dc to dc converter ics. There are 28 pins on switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4V. The test statistics indicate that DC regulator outputs a voltage of 12.5V. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulator's maximum frequency is 850kHz. The number of channels available for high-quality communication is 1.
LTC3869IGN-2#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~780kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
LTC3869IGN-2#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3869IGN-2#PBF DC to DC converter applications.
- Domestic water pumps
- Product testing
- Fire elevators
- Photovoltaic power
- Game consoles
- Digital display device
- SMT equipment
- Pipe bending machines
- Overvoltage protection circuits in TV sets
- Production lines
