LTC3873ETS8-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3873 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~60V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 9V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 240kHz |
| Duty Cycle (Max) | 78% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3873ETS8-5#TRPBF Overview
As a result of SOT-23-8 Thin, TSOT-23-8 compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.1V~60V. Qualified to work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC3873". There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 3.5V. As determined by the test statistics, the output voltage of DC regulator is 60V. Voltages 9V are the maximum that the dc to dc regulator will accept. If you are starting a new project, you should note the dc dc regulator's typical output current is 5A. DC regulator's maximum frequency is 240kHz.
LTC3873ETS8-5#TRPBF Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
LTC3873ETS8-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3873ETS8-5#TRPBF DC to DC converter applications.
- Bending machines
- Sink circuits
- Smart grid
- Planers
- Surge protection circuits
- CMM
- Printing equipment
- Experimental setup
- Motor controller circuits
- Fire elevators
