LTC3873ETS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3873 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 8.4V~60V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 4.4V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 9.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 240kHz |
| Duty Cycle (Max) | 78% |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3873ETS8#TRMPBF Overview
With its SOT-23-8 Thin, TSOT-23-8 package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8.4V~60V. Work well in dc switchers with a -40°C~85°C TA. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 9V. Search for "LTC3873" to find other relevant dc to dc converter ics. Total pins of switching converter are 8. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 4.4V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 60V voltage based on test statistics. This dc to dc regulator accepts only 9.5V input voltage at most. There is a maximum frequency of 240kHz on this dc regulators.
LTC3873ETS8#TRMPBF Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
LTC3873ETS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3873ETS8#TRMPBF DC to DC converter applications.
- Series voltage regulation circuits
- Precision electronic equipment
- Large fire protection systems
- Hydro power
- Electric water heaters
- Industrial robots
- Product burn-in
- Hydraulic presses
- Remotely powered electric motors
- Communication system
