LTC3875IUJ#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT AND 0.6 VOLT TO 5 VOLT |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3875 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~720kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3875IUJ#PBF Overview
It comes in the 40-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 4.5V~38V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 250kHz~720kHz position. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking for efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at QUAD . An array of 40 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 15V. A search for "LTC3875" will reveal other relevant dc to dc converter ics. The switching converter has a total of 40 pins. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. In most cases, the output current of the dc dc regulator will be 30A, so note that when you start the project. For better satisfaction, the value of DC to DC voltage regulator is OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT AND 0.6 VOLT TO 5 VOLT.
LTC3875IUJ#PBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~720kHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
OUTPUT VOLTAGE RANGE FROM 0.6 VOLT TO 3.5 VOLT AND 0.6 VOLT TO 5 VOLT
LTC3875IUJ#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3875IUJ#PBF DC to DC converter applications.
- Domestic water pumps
- Product burn-in
- Smoke prevention equipment
- Bending machines
- Machining centers
- Die casting equipment
- Laboratories
- Automatic plug-in machines
- Geothermal power
- Injection molding machinery
