LTC3878EGN#PBF
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Voltage | 34.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Length | 4.8895mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3878 |
| Function | Step-Down |
LTC3878EGN#PBF Overview
It comes in the 16-SSOP (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4V~38V. Work well in dc switchers with a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE FREQUENCY MODULATION. There is a DC switcher's nominal voltage of 15V. Searching "LTC3878" will return other relevant dc to dc converter ics. In total, switching converter has 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. The minimum input voltage of the dc dc voltage regulator should be 4V. DC regulator outputs 34.2V voltage based on test statistics. The dc to dc regulator can only accept a maximum input voltage of 38V. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. There is a maximum frequency of 2MHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V is used to better suit the DC to DC voltage regulator's situation.
LTC3878EGN#PBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE FREQUENCY MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V
LTC3878EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3878EGN#PBF DC to DC converter applications.
- Photovoltaic power
- Wind power
- Nuclear power plants
- CNC system
- Medical equipment
- Textile machinery
- Printing equipment
- Alternators
- Fire elevators
- CMM
