LTC3878EGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3878 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 34.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3878EGN#TRPBF Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 4V~38V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Power Good, Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE FREQUENCY MODULATION. 15V nominal DC switcher's voltage input. LTC3878 can be searched for other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4V. Test statistics indicate DC regulator outputs 34.2V voltage. This dc to dc regulator accepts only 38V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. There is a maximum frequency of 2MHz for this dc regulators. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V.
LTC3878EGN#TRPBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE FREQUENCY MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V
LTC3878EGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3878EGN#TRPBF DC to DC converter applications.
- Television equipment
- Smart grid
- Servo drive system
- Sink circuits
- Smoke prevention equipment
- ATMs
- Ball screw pair
- Arc suppression circuits
- Computer monitoring equipment of building
- Gear/thread machining machines
