LTC3878IGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LTC3878 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4V~38V |
| Control Features | Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Length | 4.8895mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC3878IGN#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. Voltages 4V~38V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Power Good, Soft Start which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE FREQUENCY MODULATION. DC switcher's voltage input of 15V. Other relevant dc to dc converter ics can be found by searching "LTC3878". There are 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4V. Statistically, the DC regulator outputs 5.3V voltage. A maximum voltage of 38V is accepted by the dc to dc regulator as an input voltage. This dc regulatorhas a max frequency of 2MHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V so that DC to DC voltage regulator better serves the purpose.
LTC3878IGN#TRPBF Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE FREQUENCY MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 34.2V
LTC3878IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3878IGN#TRPBF DC to DC converter applications.
- Computed tomography (CT)
- Scientific research
- USB circuits
- Magnetohydrodynamic power
- Servo drive system
- Sensitive electronic devices
- Current source circuits
- Domestic water pumps
- Refrigerators of central air conditioners
- Printing equipment
