LTC3880EUJ#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3880 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BOOST |
| Max Frequency | 1MHz |
| Serial Interfaces | I2C, PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3880EUJ#TRPBF Overview
With a 40-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~24V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~105°C TA dc switcher. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. QUAD are the position of the terminal of the switching converters. 40 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Searching "LTC3880" will return other relevant dc to dc converter ics. There are 40 pins on switching converter. Input voltage of dc dc voltage regulator must be 4.5V. A 5.5V voltage of DC regulator was detected in the test statistics. You should note down the dc dc regulator's usual output current of 30A when you start a project. DC regulators have a maximum frequency of 1MHz. The dc to dc voltage regulator belongs to the PolyPhase? series. Channels 1 are required for high-quality communication.
LTC3880EUJ#TRPBF Features
Transistor Driver Outputs
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC3880EUJ#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3880EUJ#TRPBF DC to DC converter applications.
- Automatic testing equipment
- Serial communication converter
- Surge protection circuits
- Product burn-in
- Thermal power
- Lathes
- Constant current circuits
- Computer monitoring equipment of building
- Medical equipment
- Imported equipment
