LTC3883EUH-1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3883 |
| JESD-30 Code | S-PQCC-N32 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Serial Interfaces | I2C, PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
LTC3883EUH-1 Overview
With a 32-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~24V. Suitable for work in a -40°C~105°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Phase Control, Power Good. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a QUAD terminal on the switching converters. An array of 32 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. In addition to "LTC3883", there are other relevant dc to dc converter ics you can find. Specifically, switching converter falls under the Switching Regulator or Controllers category. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Statistically, DC regulator outputs 3.3V volts. It should be fully noted that the dc to dc regulator only accepts 24V input voltage at most. Hence, ALSO OPERATES IN PUSH-PULL MODE is used to better suit the DC to DC voltage regulator's situation. A dc to dc voltage regulator in the PolyPhase? series, it belongs to this family.
LTC3883EUH-1 Features
Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN PUSH-PULL MODE
LTC3883EUH-1 Applications
There are a lot of Linear Technology/Analog Devices LTC3883EUH-1 DC to DC converter applications.
- Automatic plug-in machines
- Wide-range voltage regulation circuits
- Surface processing equipment
- Arc suppression circuits
- Planers
- Imported equipment
- CNC system
- Product burn-in
- Hydro power
- Injection molding machinery
