LTC3883IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3883 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 24V |
| Serial Interfaces | I2C, PMBus |
| Switching Frequency | 250kHz |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3883IUH#PBF Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~24V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Power Good. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . The 32 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. In addition to "LTC3883", there are other relevant dc to dc converter ics you can find. 32 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. As determined by the test statistics, the output voltage of DC regulator is 5.5V. If you start a project, note down the dc dc regulator's usual output current of 30A. A frequency of 1MHz is used by the switching controller. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN PUSH-PULL MODE so that the need can be met more directly. PolyPhase? series dc to dc voltage regulator belong to this series. It is possible to set the input voltage to 24V for nominal working status. At 250kHz, this controller will mostly work as expected.
LTC3883IUH#PBF Features
Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Frequency: 1MHz
ALSO OPERATES IN PUSH-PULL MODE
Switching Frequency: 250kHz
LTC3883IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3883IUH#PBF DC to DC converter applications.
- PSRR circuits
- Household control circuits
- Surge protection circuits
- Geothermal power
- Network technology
- Combined machine tools
- Digital video recorders
- Solar power plants
- Hydraulic presses
- Imported equipment
