LTC3883IUH#TRPBF
| Parameters | |
|---|---|
| Published | 2014 |
| Series | PolyPhase® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC3883 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 1MHz |
| Serial Interfaces | I2C, PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
LTC3883IUH#TRPBF Overview
The switching controller fits in the 32-WFQFN Exposed Pad package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Phase Control, Power Good provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at QUAD. There are many different types of terminations for 32. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Search for "LTC3883" to find other relevant dc to dc converter ics. Pins number 32 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 5.5V voltage. The dc to dc regulator can only accept a maximum input voltage of 24V. In most cases, the output current of the dc dc regulator will be 30A, so note that when you start the project. The max frequency of the pmic can reach 1MHz. The value of DC to DC voltage regulator is set at ALSO OPERATES IN PUSH-PULL MODE in order to fulfill the requirements more effectively. Basically, it's a dc to dc voltage regulator from the PolyPhase? series.
LTC3883IUH#TRPBF Features
Transistor Driver Outputs
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN PUSH-PULL MODE
LTC3883IUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3883IUH#TRPBF DC to DC converter applications.
- Thermal power
- PSRR circuits
- Packaging
- Remotely powered electric motors
- Milling machines
- ATMs
- Precision electronic equipment
- Computer rooms
- Smoke exhaust equipment
- Access control systems
