LTC4008EGN#TRPBF
| Parameters | |
|---|---|
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPER IN ADJ MODE FROM 3 TO 28 V; ALSO OPER IN AVER CUR MODE; CONS OFF TIME TECH ALSO POS |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4008 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Input Voltage (Min) | 6V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 345kHz |
| Battery Chemistry | Multi-Chemistry |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Height Seated (Max) | 1.75mm |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
LTC4008EGN#TRPBF Overview
In the Tape & Reel (TR) package, you will find it.An included version of it is available in the package 20-SSOP (0.154, 3.90mm Width).The device is mounted with mounting type Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.BATTERY CHARGE CONTROLLER is the analog IC used in this device.The device requires Constant - Programmable current to charge.With the base part number LTC4008, it is possible to find related parts.It has a total of 20 terminations.The device has a total of 20 pins.It is recommended to use devices with a maximum supply voltage of 28V.Input voltage is 20V.It is also possible, with this device, to generate the additional features of ALSO OPER IN ADJ MODE FROM 3 TO 28 V; ALSO OPER IN AVER CUR MODE; CONS OFF TIME TECH ALSO POS.A voltage of 6V volts is the minimal input voltage.It is most common to find parts with 345kHz switching frequencies.An input voltage of 28V is the maximum that can be applied to this device.
LTC4008EGN#TRPBF Features
Addtional features of ALSO OPER IN ADJ MODE FROM 3 TO 28 V; ALSO OPER IN AVER CUR MODE; CONS OFF TIME TECH ALSO POS
20-SSOP (0.154, 3.90mm Width) package
LTC4008EGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4008EGN#TRPBF Battery Chargers ICs applications.
- Truck dealers
- Conventional charge
- GPS tracker
- Industrial handhelds
- Robot
- Electronic dictionary
- Home routers
- Personnel carriers
- Portable medical instruments
- Energy harvesting
