LTC4010CFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4010 |
| Pin Count | 16 |
| Max Output Current | 2A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Max Output Voltage | 5.5V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 34V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 34V |
| Min Output Voltage | 4.5V |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 615kHz |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 16 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 4A |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4010CFE#PBF Overview
There is an Tube package that contains it. In order to make it more convenient, it has been included in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package.Amounting type Surface Mount is the one associated with the device.The temperature should be set to 0°C~85°C TA to ensure reliable performance.In order for the device to function, an analog IC named BATTERY CHARGE CONTROLLER must be used.The device needs to be charged at a current of Constant - Programmable in order to function.If you use the base part number LTC4010, you can look for related parts.A total of 16 terminations can be found in it.There are 16 pins on it, so it has a very simple design.There are various programmable features, such as Timer.For it to work, 16 pins are required.This device can be operated at an input voltage of 34V without being damaged.It can function at as low a supply voltage as possible, such as 4.5V.A minimum input voltage of 4.5V volts is required for this device.The device is 12V input voltage.34V is the maximum input voltage it can handle.Its switching frequency is 615kHz at most.This operation requires a voltage of 5.5V as the maximum output supply voltage.A reduction in maximum output current to 2A occurs during operation.
LTC4010CFE#PBF Features
16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
LTC4010CFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4010CFE#PBF Battery Chargers ICs applications.
- Smart power strips
- Emergency/Security
- Fast charge
- Opportunity charge
- Marine buoy lights
- High end, feature-rich consumer
- Various chargers
- Automotive electronics
- Laptops
- MP3, MP4 player
