LTC4012CUF-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4012 |
| Pin Count | 20 |
| JESD-30 Code | S-PQCC-N20 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Input Voltage-Nom | 20V |
| Power Supplies | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Input Voltage (Min) | 6V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 633kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 16.4V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
LTC4012CUF-1#TRPBF Overview
The package that has it is the Tape & Reel (TR) package.Located in package 20-WFQFN Exposed Pad, it can be found there.Mounting type Surface Mount is chosen for the device.This is the right thing to do: set the temperature to 0°C~85°C TA.In order to operate, the device relies on an analog IC named SWITCHING CONTROLLER.Charge the device by supplying it with Constant - Programmable current.It is possible to find the related parts to the base part number LTC4012.Taking it as a whole, it has been concluded that there are 20 terminations to be found.It is 16.4V for the battery pack.In addition, it is equipped with 20 pins.Its maximum supply voltage is 28V.Batteries with a 12V voltage are compatible with it.In the case of 5V output voltage, there is a possibility of optimal efficiency.This device belongs to the subcategory of Power Management Circuits.Regarding the power supply for the part, it is set to 12V.PowerPath? is the series number of this electrical component.The device has an input voltage of 20V.Voltages below 6V volts are minimal.Parts with 633kHz switching frequencies are at most available.An input voltage of 28V is the maximum that can be applied to this device.
LTC4012CUF-1#TRPBF Features
Battery pack voltage of 16.4V
Power Management Circuits subcategory
20-WFQFN Exposed Pad package
LTC4012CUF-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4012CUF-1#TRPBF Battery Chargers ICs applications.
- Medical
- GPS portable devices
- Marine buoy lights
- Embedded automotive applications
- Rental fleets
- Electric tour bus
- Fast charge
- Remote control toys
- GPS tracker
- USB power delivery (USB-C) devices
