LTC4012CUF-2#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4012 |
| Pin Count | 20 |
| JESD-30 Code | S-PQCC-N20 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Input Voltage-Nom | 20V |
| Power Supplies | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Input Voltage (Min) | 6V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 633kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Voltage - Supply (Max) | 28V |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 16.8V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
LTC4012CUF-2#TRPBF Overview
It is included in the Tape & Reel (TR) package for convenience.There is a 20-WFQFN Exposed Pad package that comes with this item.There is a type of mounting for this device: Surface Mount.The best way to adjust the temperature is to set it to 0°C~85°C TA.There is an analog IC of SWITCHING CONTROLLER used in this device.A charge of Constant - Programmable current is required to be applied to the device.Based on the base part number LTC4012, it is possible to find related parts for this device.In general, the number of terminations found within it is 20 as a whole.It is 16.8V for the battery pack.Pins 20 are included.There is 28V maximum supply voltage for this device.It should be possible to run it from a 12V battery it should be able to run at all times.In the case of 5V, the output voltage is likely to produce high efficiency.The device falls under the Power Management Circuits subcategory.12V is the power supply setting for the part.It belongs to the PowerPath? series of electrical components.Voltage input for the device is 20V.It is necessary to have a 6V volt input voltage.This part has a maximum switching frequency of 633kHz.An input voltage of 28V is the maximum that can be applied to this device.
LTC4012CUF-2#TRPBF Features
Battery pack voltage of 16.8V
Power Management Circuits subcategory
20-WFQFN Exposed Pad package
LTC4012CUF-2#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4012CUF-2#TRPBF Battery Chargers ICs applications.
- Truck dealers
- Electric tour bus
- MP3, MP4 player
- Modern LA
- Drone
- GPS portable devices
- Wearables
- Digital camera
- High end, feature-rich consumer
- Portable speaker systems
