LTC4012IUF#PBF
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 28V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4012 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 28V |
| Input Voltage-Nom | 20V |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 6V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Max Output Voltage | 28V |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 633kHz |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 12A |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
LTC4012IUF#PBF Overview
This can be found in the Tube package.A 20-WFQFN Exposed Pad package is included with this item as part of its contents.The device is mounted with mounting type Surface Mount.The correct temperature setting is -40°C~125°C TA.To operate the device, an analog IC called SWITCHING CONTROLLER is used.To charge the device, there is a requirement for Constant - Programmable current.A list of related parts can be found by searching for the base part number LTC4012.A total of 20 terminations can be found in it.Due to the 20 pins on it, it is a very simple circuit.The product is able to function with the help of 20 pins that are required.In order to run it, you would need a battery with 12V.In order for the device to operate properly, the supply voltage should not exceed 28V.Having the output voltage set to 28V may result in high efficiency.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.It can function at as low a supply voltage as possible, such as 6V.This component is a member of the electrical component series PowerPath?.Input voltage minimum is 6V volts, which is a requirement of the device.The device has an input voltage of 20V.It can accept a maximum input voltage of 28V volts.As well as the additional features of ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 28V, this device can also be used to generate the same functionality.It is most common to find parts with 633kHz switching frequencies.In order for the operation to be carried out successfully, a maximum output supply voltage of 28V is required.
LTC4012IUF#PBF Features
Power Management Circuits subcategory
Addtional features of ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 28V
20-WFQFN Exposed Pad package
LTC4012IUF#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4012IUF#PBF Battery Chargers ICs applications.
- Automotive electronics
- Man lift
- Industrial lighting
- Model aircraft
- Various chargers
- Material handling
- Tablets
- Industrial handhelds
- Cellphones
- Shop charger
